HVOF制备MCrAlY涂层过程中WC杂质颗粒的演变遗传行为研究

在热喷涂工业生产过程中,喷涂制备不同材料体系的涂层之前需要对送粉路径(送粉罐、送粉盘、搅拌器、送粉管路、送粉针)进行清理,但由于送粉路径内部结构复杂且存在静电吸附效应,使得残留于喷涂系统的粉末无法被完全去除,通常以微量杂质颗粒的形式被带入新涂层,进而影响新涂层的性能。为此,本文研究了在单晶基材表面采用高速火焰(HVOF)喷涂制备MCrAlY涂层过程中,送粉路径残留的WC杂质颗粒(WC-10Co4Cr)在涂层及涂层与基材界面处的遗传演变行为,分别采用SEM、EDS分析了WC杂质在喷涂态、热处理态涂层中的微观组织和相组成。研究结果表明,WC杂质颗粒确实存在于MCrAlY涂层中,并在后期热处理及氧化试验中进一步分解而固溶于涂层中,甚至扩散至单晶基材内部引起含W碳化物的生成,影响涂层及单晶基材的显微组织,改变局部的成分均匀性。同时,本文还采用ThermoCalc软件进行了热力学计算模拟,辅助分析了WC分解及W与C元素在显微组织中的遗传特性。对于WC类粉末和MCrAlY粉末共用的HVOF喷涂设备,建议给MCrAlY粉末配备单独的送粉路径,以确保涂层的纯净度与质量。     

Feasibility study to control fiber distribution for enhancement of composite properties via three-dimensional printing

The distribution of fibers in the composite (which takes into account both their locations and orientations) is one of the important factors that affect the mechanical properties of FRCs. However, this parameter depends on various factors during composite fabrication, and controlling the distribution of fibers in the produced material represents a significant challenge. In this study, the applicability of three-dimensional (3D) printing technique for controlling fiber distributions was evaluated. The fibers fabricated using a 3D printer were placed inside a mold to produce cementitious composites. Three-point bending tests were conducted and the results of the experiment were discussed.     

海洋非成岩天然气水合物原位快速制备实验及评价

我国的海洋天然气水合物（以下简称水合物）资源主要分布在沿海大陆架水深介于300～3 000 m的深水区，具有弱胶结、非成岩的特征，为了测试和研究该类型水合物必须原位、大量、快速制备样品，而目前常用的搅拌法、喷淋法、鼓泡法等制备技术却存在着生成速度慢、储气密度低等问题。为此，自主设计、研制了1 062 L非成岩水合物快速制备釜，针对我国南海非成岩水合物的物性特征，开展了搅拌法、鼓泡法、喷淋法单一制备方法及“三合一”法（上述3种方法相结合）水合物制备实验，测试了实验过程中温度、压力、电阻率及反应时间等数据，分析比较了几种不同制备方法的水合物生成情况与制备效率。实验结果表明：①搅拌法、鼓泡法、喷淋法制备水合物过程中，生成的水合物均缓慢增加并逐渐铺满整个液面；②搅拌法制备过程中可以观测到明显的诱导期，而喷淋法、鼓泡法及“三合一”法却无明显的诱导期；③单一制备方法及“三合一”法制备水合物过程中，电阻率均随反应时间的增加而增加，其变化趋势亦与水合物制备速率基本一致；④“三合一”法的制备周期明显短于单一制备方法（搅拌法、喷淋法、鼓泡法单一方法的制备时间分别约为“三合一”法的5.14倍、3.59倍、3.16倍）。结论认为，所研制的1 062 L水合物快速制备釜能够实现海洋非成岩水合物样品的原位、快速制备；较之于单一制备方法，“三合一”法大大提高了水合物的制备效率。     

Cathode plasma electrolytic deposition of Al2O3 coatings doped with SiC particles

Semiconductor particles doped Al₂O₃ coatings were prepared by cathode plasma electrolytic deposition in Al(NO₃)₃ electrolyte dispersed with SiC micro- and nano-particles (average particle sizes of 0.5–1.7?µm and 40?nm respectively). The effects of the concentrations and particle sizes of the SiC on the microstructures and tribological performances of the composite coatings were studied. In comparison with the case of dispersing with SiC microparticles, the dispersion of SiC nanoparticles in the coatings was more uniform. When the concentration of SiC nanoparticles was 5?g/L, the surface roughness of the composite coating was reduced by 63%, compared with that of the unmodified coating. Friction results demonstrated that the addition of 5?g/L SiC nanoparticles reduced the friction coefficient from 0.60 to 0.38 and decreased the wear volume under dry friction. The current density and bath voltage were measured to analyze the effects of SiC particles on the deposition process. The results showed that the SiC particles could alter the electrical behavior of the coatings during the deposition process, weaken the bombardment of the plasma, and improve the structures of the coatings.     

Comprehensive Analysis of Secure Data Aggregation Scheme for Industrial Wireless Sensor Network

As an Industrial Wireless Sensor Network (IWSN) is usually deployed in a harsh or unattended environment, the privacy security of data aggregation is facing more and more challenges. Currently, the data aggregation protocols mainly focus on improving the efficiency of data transmitting and aggregating, alternately, the aim at enhancing the security of data. The performances of the secure data aggregation protocols are the trade-off of several metrics, which involves the transmission/fusion, the energy efficiency and the security in Wireless Sensor Network (WSN). Unfortunately, there is no paper in systematic analysis about the performance of the secure data aggregation protocols whether in IWSN or in WSN. In consideration of IWSN, we firstly review the security requirements and techniques in WSN data aggregation in this paper. Then, we give a holistic overview of the classical secure data aggregation protocols, which are divided into three categories: hop-by-hop encrypted data aggregation, end-to-end encrypted data aggregation and unencrypted secure data aggregation. Along this way, combining with the characteristics of industrial applications, we analyze the pros and cons of the existing security schemes in each category qualitatively, and realize that the security and the energy efficiency are suitable for IWSN. Finally, we make the conclusion about the techniques and approach in these categories, and highlight the future research directions of privacy preserving data aggregation in IWSN.     

湖北郧西西部地区金、锑矿成矿要素及成矿模式

湖北郧西西部地区金、锑矿位于秦岭泥盆系多金属成矿带的东南部镇旬成矿区的东侧,通过对郧西西部地区金、锑矿的成矿规律的综合分析和成矿要素的总结归纳,认为该区金、锑矿受构造、岩性控制。     

不同抗疟药物对红内期恶性疟原虫3D7线粒体呼吸的影响

目的：利用Seahorse XFe96分析仪对6大类别共计13种国际一线抗疟药物作用于红内期恶性疟原虫3D7（Plasmodium falciparum 3D7）线粒体电子传递链（electron transport chain, ETC）进行评价。方法：采用三天抑制法和SYBR Green I荧光分析法对体外药物作用于P. falciparum 3D7的抗疟活性进行评价，采用磁珠分选技术对P. falciparum 3D7虫株进行分离纯化，采用Seahorse XF分析系统的线粒体耗氧率OCR值（Oxygen Consumption Rate）对P. falciparum 3D7线粒体不同时刻的生物能进行表征，进而考察不同抗疟药物对红内期恶性疟原虫线粒体有氧呼吸的影响。结果：流式检测结果显示，成功富集到虫期较为一致的滋养体期疟原虫。体外抗疟活性评价结果显示，除双胍类抗疟药物氯胍（proguanil, Pro）外，其余12种抗疟药物对P. falciparum 3D7的药效均为nmol/L级别。线粒体有氧呼吸考察的结果显示，双氢青蒿素（dihydroartemisinin, DHA）和氯喹（chloroquine, CQ）的5种浓度剂量（0.4、1、5、10、50×IC50）对P. falciparum 3D7线粒体有氧呼吸均无明显影响。13种常用抗疟药物在5×IC50浓度剂量下，青蒿素（artemisinin, ART）、蒿乙醚（arteether, ARE）和蒿甲醚（artemether, ARM）均能显著提高线粒体最大呼吸；奎宁（quinine, QN）和Pro仅对P. falciparum 3D7线粒体ETC的氧化磷酸化具有解偶联作用，未完全破坏线粒体ETC的功能；阿托伐醌（atovaquone, Ato）对P. falciparum 3D7线粒体有氧呼吸有明显的抑制作用，显著降低线粒体最大呼吸和质子的泄漏，完全破坏了线粒体ETC的功能；其余抗疟药物对P. falciparum 3D7线粒体有氧呼吸均无明显影响。 结论：13种国际一线抗疟药物中大多数抗疟药物的靶标并非是疟原虫线粒体有氧呼吸的ETC通路。     

Co/Al金属在聚晶立方氮化硼中的作用及加工适用性

通过正交试验和切削试验相结合的方法,检测聚晶立方氮化硼(PCBN)烧结体的硬度和强度,分析并观察烧结体组元相互熔渗状况以及微观形貌,探索了Co/Al金属对PCBN烧结体的影响以及不同结合剂含量PCBN的加工适应性。试验结果表明:CBN含量和Co含量对PCBN的抗弯强度和硬度影响显著;在刀具材料的选择上,高PCBN浓度的刀具适合加工灰铸铁,低PCBN浓度的刀具适合加工淬硬钢;Co/Al金属能够通过高温高压在PCBN层和硬质合金基体之间进行相互熔渗,导致PCBN层在距硬质合金10~20μm处Co含量达到最大值;PCBN的失效为穿晶断裂方式。     

基于最小方差的声线跟踪自适应分层算法

针对高精度水声定位系统中定位精度与计算量相互矛盾的问题,提出了基于最小方差的声线跟踪自适应分层算法。该算法根据声速在有限范围内规律变化的特点,对声速剖面全局搜索,通过各段声速散点到其拟合直线的总方差表示拟切分段与原始声速剖面的差别,利用最大差别找出最佳切分点,保留原始声速剖面特征,实现对声速剖面的简化。实验结果表明,该算法在保证定位精度的同时能够提高计算效率,具有良好的工程应用价值。